Radionomy - Board
https://forum.radionomy.com/

Here is a step-by-step to get you started
https://forum.radionomy.com/viewtopic.php?f=25&t=36472
Page 1 of 2

Author:  Avinu [ Fri Jun 23, 2017 11:49 pm ]
Post subject:  Here is a step-by-step to get you started

It's not hard, but it is precise. Here is a step-by-step to get you started.

1. Create one single "Music Box" -- Name it "Music" or anything you want.
2. Upload all of your tracks into it. (200 or so)
3. Add that "box" to one "clock" called "Day".
4. Add "Day" to one "Day Template".
5. Finally, drag that one "DayTemplate" to each day on the calendar under the "Planning" tab.

I end up just working my way left to right through "Audio" "Clocks" "Day Templates" "Planning".

Next you should set up advertisement fillers. If you don't, the planner will plug in some randomly that are totally foreign to your genre.

6. Find several (at least 6) instrumental tracks (or anything you want) that are precisely 2:00 minutes in length.

7. Create a "filler" box naming it "Filler" or anything you want.
8. Upload your 2:00 minute filler tracks into it.
9. Set the constraints on your filler box to the lowest number allowed.
11. Go to the "Planning" page, look to the right under "Ad screens set up"
12. Select your filler box under "Filler box"
13. Generate your Planning for each day. If you already did it in step 5 above, redo it.

(From Domi)
RMO
If the 2 minutes filler is a music protected by copyright and/or neighbouring rights, you must tag the file with the real artist name and title.
If you use something else (station promotion for example), you can give the name you want but avoid giving the same artist name to different files because the minimum constraint you can set on a filler is 45 minutes (60 by default) and the planning generator will not allow the same artist name 30 minutes after a file with the same artist name.

Author:  dailyplanit [ Wed Jul 12, 2017 1:05 pm ]
Post subject:  Re: Allowing me to Activate would be the biggest improvement

excellent someone who speaks English and makes sense that Radionomy manual reads like... well its just silly
This I can follow and it is so much shorter LOL

BUT when I tried it, it said ERROR in my Calander dates and no reason why? What to do?

Author:  dailyplanit [ Wed Jul 12, 2017 1:11 pm ]
Post subject:  Re: Allowing me to Activate would be the biggest improvement

Mavent wrote:
WHY is it so hard to just get a station running?

I've followed every single bit of the documentation, and still I'm left with nothing but that shitting "Mask Off" rap song as the sole music on my station. There's something inherently wrong with the system if it's this damn hard to just get a station playing music.



Dont worry I have been finding it way hard too but that guys advice is better than all the tutorials and manuals and so short yet so informative

Author:  Avinu [ Wed Jul 12, 2017 1:53 pm ]
Post subject:  Re: Allowing me to Activate would be the biggest improvement

I'm happy that you found it helpful.

Author:  maxxplank [ Wed Jan 24, 2018 5:51 pm ]
Post subject:  Re: Here is a step-by-step to get you started

Thanks for this nice little step by step. I've been struggling to get my station off the ground so glad i read this.

Author:  Avinu [ Wed Jan 24, 2018 5:59 pm ]
Post subject:  Re: Here is a step-by-step to get you started

you are more than welcome.

Author:  homeworkhelp [ Fri Feb 16, 2018 8:33 am ]
Post subject:  Re: Here is a step-by-step to get you started

Excellent job.. Keep continue your efforts. Thumbs up!

Avinu wrote:
It's not hard, but it is precise. Here is a step-by-step to get you started.

1. Create one single "Music Box" -- Name it "Music" or anything you want.
2. Upload all of your tracks into it. (200 or so)
3. Add that "box" to one "clock" called "Day".
4. Add "Day" to one "Day Template".
5. Finally, drag that one "DayTemplate" to each day on the calendar under the "Planning" tab.

I end up just working my way left to right through "Audio" "Clocks" "Day Templates" "Planning".

Next you should set up advertisement fillers. If you don't, the planner will plug in some randomly that are totally foreign to your genre.

6. Find several (at least 6) instrumental tracks (or anything you want) that are precisely 2:00 minutes in length.

7. Create a "filler" box naming it "Filler" or anything you want.
8. Upload your 2:00 minute filler tracks into it.
9. Set the constraints on your filler box to the lowest number allowed.
11. Go to the "Planning" page, look to the right under "Ad screens set up"
12. Select your filler box under "Filler box"
13. Generate your Planning for each day. If you already did it in step 5 above, redo it.

(From Domi)
RMO
If the 2 minutes filler is a music protected by copyright and/or neighbouring rights, you must tag the file with the real artist name and title.
If you use something else (station promotion for example), you can give the name you want but avoid giving the same artist name to different files because the minimum constraint you can set on a filler is 45 minutes (60 by default) and the planning generator will not allow the same artist name 30 minutes after a file with the same artist name.

Author:  Dhiana [ Fri Jun 08, 2018 8:52 am ]
Post subject:  Re: Here is a step-by-step to get you started

Avinu wrote:
It's not hard, but it is precise. Here is a step-by-step to get you started.

1. Create one single "Music Box" -- Name it "Music" or anything you want.
2. Upload all of your tracks into it. (200 or so)
3. Add that "box" to one "clock" called "Day".
4. Add "Day" to one "Day Template".
5. Finally, drag that one "DayTemplate" to each day on the calendar under the "Planning" tab.

I end up just working my way left to right through "Audio" "Clocks" "Day Templates" "Planning".

Next you should set up advertisement fillers. If you don't, the planner will plug in some randomly that are totally foreign to your genre.

6. Find several (at least 6) instrumental tracks (or anything you want) that are precisely 2:00 minutes in length.

7. Create a "filler" box naming it "Filler" or anything you want.
8. Upload your 2:00 minute filler tracks into it.
9. Set the constraints on your filler box to the lowest number allowed.
11. Go to the "Planning" page, look to the right under "Ad screens set up"
12. Select your filler box under "Filler box"
13. Generate your Planning for each day. If you already did it in step 5 above, redo it.

(From Domi)
RMO
If the 2 minutes filler is a music protected by copyright and/or neighbouring rights, you must tag the file with the real artist name and title.
If you use something else (station promotion for example), you can give the name you want but avoid giving the same artist name to different files because the minimum constraint you can set on a filler is 45 minutes (60 by default) and the planning generator will not allow the same artist name 30 minutes after a file with the same artist name.


Hello there
I would like to know if this platform is available anywhere in the world. I am from Bucharest, Romania - want to start a radio for kids & family.
I followed all steps but seems that creating boxes does not work at all. I push the buttons and nothing happens.
Thank you for your help! :)

Author:  Avinu [ Sun Jun 10, 2018 2:56 am ]
Post subject:  Re: Here is a step-by-step to get you started

Sorry, I'm not able to help you but maybe one of the moderators will jump in. They can see what's happening and I can't. Hope you can get things worked out.

Author:  peellandfm [ Sun Jun 10, 2018 6:39 pm ]
Post subject:  Re: Here is a step-by-step to get you started

Dhiana wrote:

Hello there
I would like to know if this platform is available anywhere in the world. I am from Bucharest, Romania

I don't know if Radionomy is geoblocked in Romania. Easy to try. If you can listen to this station you know it isn't.
http://listen.radionomy.com/peelland-fm or you can try this one https://www.radionomy.com/en/radio/peel ... oplay=true

Dhiana wrote:

I followed all steps but seems that creating boxes does not work at all. I push the buttons and nothing happens.
Thank you for your help! :)


:D push the button doesn't work
You have to write the name of your box first, and after that push the button.
Succes

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/